- HOME
- WHAT’S NEW
- PRECISION MEASUREMENT
- LCR Bridge 6451-2 with Limits Comparator
- PRESSURE MEASUREMENT
- POWER PLANT
- RESISTANCE MEASUREMENT
- MO-5892-1A Portable Digital Micro-ohmmeter
- MO-5889-200A Portable Digital Micro-ohmmeter
- MO-589R-200A Portable Digital Micro-ohmmeter
- MO-5893-10A Portable Digital Micro-ohmmeter
- MO-5893-10AT Portable Digital Micro-ohmmeter
- MO-5898-100A Portable Digital Micro-ohmmeter
- MO-5898-200A Portable Digital Micro-ohmmeter
- MO-5899-100R Portable Digital Micro-ohmmeter
- Resistance Test Clamp
- Kelvin Test Lead Sets
- Model 5894 Wide Range Precision Ohmmeter
- Model 5896C Dual Channel Transformer Micro-Ohmmeter (RM)
- Model 5898 Portable 200A Precision Micro-Ohmmeter (RM)
- Standard Reference Resistors
- PORTABLE BRIDGES
- DECADE RESISTANCE BOXES
- TRANSFORMER TEST EQUIPMENT
- Portable Transformer Ratiometer Model 4167F
- Portable Transformer Ratiometer Model 4167F-(CVT)
- Portable ‘Q’ (Quality) meter type 5867
- Transformer Micro-Ohmmeter (10 Amp) 5895
- Dual Channel Transformer Micro-Ohmmeter 5896C
- High Current (100 Amp) Portable Micro-Ohmmeter 5897
- High Current (200A) Portable Micro-Ohmmeter 5898
- High Resistance Fault Locator 5762N
- PORTABLE TEST & MEASUREMENT
- SUBMARINE CABLE TEST
- Long-Haul Submarine Cable Test Set 5903N
- Portable Short-Haul Submarine Cable Test Set Model 5910
- Short Haul Submarine Cable Test Set Model 5910R (Rack Mount)
- Electroding Generator Model 5915
- Electroding Detector with GPS Model 5916G
- Beach Probe & Battery Powered Portable Electroding Detector Models 5917 and 5918
- Cable Termination Unit Type 5941
- Cable Termination Unit Type 5941-3 LAN
- P1000E Earth Probe
- DIGITAL EARTH TESTER
- OBSOLETE PRODUCTS
- HISTORY
- CONTACT
QUESTIONS? CALL: 01376 335271
Tinsley offer a wide range of products ranging from transformer testers to submarine cable equipment
T 01376 335271
Email: info@tinsley.co.uk
Tinsley Instrumentation Ltd
1 Warner Drive, Springwood Industrial Estate, Braintree, Essex CM7 2YW
Long-Haul Submarine Cable Test Set 5903N
The Tinsley Long Haul Submarine Cable Test Set brings the latest technology to the tried and tested DC methods of cable fault location for all submarine cable systems. Modular design allows for variable power outputs to meet client requirements.
The more common test procedures which are associated with the location of types of cable fault such as ‘open circuits’ and ‘shunt faults’ are preprogrammed into the instrument. This allows the procedure to be carried out automatically therefore eliminating operator errors and reducing the uncertainty of the predicted fault position.
Features
- Dynamic Polarity Control Positive or Negative Cable Feed
- Operation Modes Constant Current, or Constant Voltage
- Settable Maximum Cable Voltage and Current Limits
- Electroding Generator 15Hz- 45Hz Adjustable Modulation
- Full History log against each cable installation
- Automatic or Manual Mode
- Stored cable parameters
- Self Contained, with colour LCD
- External Safety Interlock
- External Power-on Alarm Contacts
- Self Test using internal calibrated Reference
For more information contact Tinsley
Operational Modes: Cable Test, Resistance, Capacitance, IR Impedance, No Loss of Current Kennelly’s Two & Three Current Test, Schaefer Test Method, Open Circuit Short Circuit, Fixed Load, Power Feeding.
Input Requirements: 3 Phase 20 Amps, Sea Earth, System Safety Earth
Power Output Options:
Single Module 10Kv, at Max 1.2 Amps 20Kv at Max 0.6 Amps
Dual Module 10Kv at Max 2.4 Amps 20Kv at Max 1.2 Amps
Triple Module 10Kv at Max 3.6 Amps 20Kv at Max 1.8 Amps
Resistance measurement in ranges:
1-9.9R
10 to 99.9R
100 to 999.9R
1K to 10K
10K to 100K
Resistance Accuracy: 1%
Capacitance Measurement:
0 to 1uF
1 to 10uF
10 to 100uf
100 to 1mF
1mF to 10mF
10mF to 100mF
Capacitance Accuracy: 2%
Insulation Resistance: 10x104 to 10x107
Voltage Measurement: 10v to 20Kv
Current Measurement: 10uA to 3.6A
Single Unit Variant Size: 19” Wide, 82cm Deep, 160cm Weight: 95kgs for single Unit
Dual Unit Variant Size: 19” Wide, 82cm Deep, 160cm Weight: 115kgs
Triple Unit Variant: TBA
* Subject to change without notification.
The instrument may be set for a wide range of voltage and current limits making it suitable for use with most submarine communication cable systems. Safety being an important feature, the instrument gives a continuous indication of the state of charge of the cable under test and will automatically disallow current, voltage or polarity changes to be made until any voltage on the cable has fallen to a level which is safe for both the cable and the instrument. To ensure complete operator safety a number of interlocks operate disconnecting all power before access is allowed to the high voltage areas.
The setting up of the instrument is via the menu driven touch screen display. This display is also used to indicate the progress of a test procedure during its implementation.
Functions may also be controlled via a computer and data obtained may be stored for future analysis. Two 5903N may also be used to enable two 5903N’s to be connected with each other when carrying out double ended tests such as ‘no loss of current.
});